Quick answer
Green algae turns the water green or cloudy. Yellow (mustard) algae is yellow-brown dust on shady walls that brushes off easily and comes back. Black algae is black spots with raised heads, rooted in plaster, that don’t brush off. All three need free chlorine held at about 40% of your stabilizer level plus brushing; mustard and black algae need a few extra steps.
Green algae
The most common kind. It floats in the water and clings to the walls, turning the pool green or cloudy. It grows when free chlorine drops too low for your stabilizer level. Clear it with the steps in the green pool guide.
Yellow (mustard) algae
Yellow-brown dust that brushes off easily and keeps coming back in shady spots. It hides in pool toys, floats, brushes and swimsuits, so wash those in chlorine too. Treat it like green algae: raise free chlorine to about 40% of your CYA, brush daily, and hold chlorine up until the overnight loss is 1 ppm or less. If it brushes off and never comes back, it may be pollen or dirt instead.
Black algae
Black spots with raised heads that don’t brush off. It has roots in plaster, so it needs force: brush the spots hard with a stainless steel brush (plaster only, never on vinyl, pebble or glass tile), rub them with a chlorine tablet if your finish allows it, then shock and hold chlorine high for several days. Keep brushing daily for a week.
Slimy walls
Slimy walls or steps are the first sign of algae or biofilm, even when the water looks clear. Brush everything, bring chlorine to the top of your range and check the stabilizer. Pay extra attention to steps, benches and shady corners, where circulation is weak.
Chlorine levels for your stabilizer
Find your stabilizer (CYA) reading on the left. Keep free chlorine at or above the daily level every day, and hold the shock level to kill algae.
| Stabilizer (CYA), ppm | Daily free chlorine, at least (ppm) | Shock level for algae (ppm) |
|---|---|---|
| 30 | 3 | 12 |
| 40 | 3 | 16 |
| 50 | 4 | 20 |
| 60 | 4.5 | 24 |
| 80 | 6 | 32 |
Daily level: at least 7.5% of your CYA, and never below 3 ppm. Shock level: about 40% of your CYA. Salt pools usually run 4–6 ppm.
How much to add
| Product | What it does | Per 10,000 US gallons | Per 10,000 liters |
|---|---|---|---|
| Liquid chlorine, 10% | Raises free chlorine about 10 ppm | 1 gal | 1 L |
Amounts are for the product strengths shown. Strengths differ, so check your label. Twice the water needs twice the amount. Add one chemical at a time with the pump running, wait, and test again before adding more.
Why algae keeps coming back
- The shock was stopped before the overnight chlorine test passed.
- Stabilizer (CYA) is too high, so normal chlorine levels can’t keep up.
- Dead spots with poor circulation.
- A dirty filter, or filter media that needs cleaning or replacing.
- Algae hiding in toys, floats and cleaning equipment.
Safety first
Read the product label every time and wear gloves and eye protection. Never mix chemicals, not even two kinds of chlorine: chlorine and acid together make a toxic gas, and some chlorines can explode on contact. Add each chemical to the pool separately, with the pump running, in different spots and 15–30 minutes apart. Always add chemicals to water, never water to chemicals. Keep children and pets away while you add them.
If a chemical gets in someone’s eyes or on their skin, rinse with plenty of water for 15 minutes. If someone breathes fumes, move them to fresh air. Then call your local emergency number or poison control center (in the US: 911 or Poison Control, 1-800-222-1222).
When to call a pool professional
Call a pool company if black algae covers large areas of the pool (they may recommend an acid wash), or if algae keeps coming back after a full shock that passed the overnight test.
Common questions
What is the yellow dust on my pool walls?
If it’s yellow-brown, brushes off easily and comes back in shady spots, it’s most likely mustard algae. If it brushes off and doesn’t come back, it may be pollen or dirt.
Can I use a steel brush on my pool?
Only on plaster. Never use a stainless steel brush on vinyl, pebble finishes or glass tile.
How do I keep algae from coming back?
Keep free chlorine at least at 7.5% of your CYA every day, keep CYA in range, brush every week, keep the filter clean and the water moving, and finish every shock until the overnight test passes.
Still not sure? Ask Blue
Blue, the pool AI, answers in your language, reads a photo of your water or test strip, and works out the amounts for your pool’s size. Free.
Ask Blue freeRelated guides
- Green pool: how to clear it
- How much chlorine does my pool need?
- Cyanuric acid (stabilizer): how much your pool needs
- All pool help guides
This guide is general information for home pools. Always follow your equipment maker’s instructions, your product labels and your local rules. Updated November 8, 2026.
