Quick answer
A pump that won’t prime is almost always short of water or sucking air. Check the water level (middle of the skimmer opening), the skimmer and pump baskets, the pump lid O-ring, that the lid is tight, that the valves are open and that the filter isn’t clogged. Then fill the pump basket with a hose, close the lid and restart. Never run the pump dry for more than a few minutes: it melts the seals.
How to get the pump to prime
- Turn the pump off.
- Check the water level: it should reach the middle of the skimmer opening.
- Empty the skimmer and pump baskets.
- Check the pump lid O-ring. If it’s cracked or dry, replace it or lubricate it with silicone lubricant, then close the lid tight.
- Make sure the valves are open and the filter isn’t clogged.
- Fill the pump basket with water from a hose, close the lid and restart.
- If it doesn’t catch water within a few minutes, turn it off and look for an air leak.
Air in the pump basket or bubbles from the jets
Air means it’s getting in on the suction side: low water, a clogged skimmer, a loose or cracked lid O-ring, or a loose drain plug on the pump. If those are fine, a cracked fitting or pipe before the pump is pulling air. With the pump running, smear shaving cream on the joints: where it gets sucked in is the leak.
Weak flow from the jets
Work from the pool back: water level, baskets, filter pressure (high means a dirty filter; low means something before the pump is blocked), valve positions, and the pump impeller, which debris can clog.
Safety first
Read the product label every time and wear gloves and eye protection. Never mix chemicals, not even two kinds of chlorine: chlorine and acid together make a toxic gas, and some chlorines can explode on contact. Add each chemical to the pool separately, with the pump running, in different spots and 15–30 minutes apart. Always add chemicals to water, never water to chemicals. Keep children and pets away while you add them.
If a chemical gets in someone’s eyes or on their skin, rinse with plenty of water for 15 minutes. If someone breathes fumes, move them to fresh air. Then call your local emergency number or poison control center (in the US: 911 or Poison Control, 1-800-222-1222).
When to call a pool professional
Call a pool company if the pump still won’t prime after these checks. They can pressure-test the suction line to find a hidden leak.
Common questions
Why does my pool pump keep losing prime?
It’s pulling air on the suction side: low water, a clogged skimmer, a worn lid O-ring, a loose drain plug, or a crack in a fitting or pipe before the pump.
Can a pool pump run dry?
Only for a few minutes. Running dry melts the seals.
Still not sure? Ask Blue
Blue, the pool AI, answers in your language, reads a photo of your water or test strip, and works out the amounts for your pool’s size. Free.
Ask Blue freeRelated guides
- Pool filter pressure too high: what it means and what to do
- Cloudy or milky pool water: how to clear it
- All pool help guides
This guide is general information for home pools. Always follow your equipment maker’s instructions, your product labels and your local rules. Updated November 8, 2026.
