Quick answer
Cloudy water usually has one of four causes, in this order: free chlorine too low for your stabilizer, pH above 7.8 or high calcium, a filter that isn’t doing its job, or a fresh load of rain, dirt, pollen or swimmers. Raise chlorine first, then balance pH, then check the filter’s pressure and run time.
Cloudy or milky?
Milky white water usually means very fine particles the filter can’t catch, or calcium coming out of the water. It often follows cal-hypo shock added when pH or calcium is high, very high alkalinity, or a sand or DE filter that lets material through.
How to clear cloudy water
- Test free chlorine, pH and stabilizer (CYA). Chlorine that is low for your CYA is the most common cause, and often the start of algae.
- If chlorine is low, raise it to at least 7.5% of your CYA reading (3–5 ppm in most pools).
- If pH is above 7.8, lower it to about 7.4 with acid, a little at a time.
- Check the filter: note the pressure, look for a torn cartridge or broken parts, and make sure the pump runs long enough to filter all the water at least once a day.
- Look at the return jets. If sand or DE is blowing back into the pool, the filter has a broken part.
- Run the filter continuously and test again the next day.
How much to add
| Product | What it does | Per 10,000 US gallons | Per 10,000 liters |
|---|---|---|---|
| Liquid chlorine, 10% | Raises free chlorine about 10 ppm | 1 gal | 1 L |
| Muriatic acid, 31% | Lowers pH about 0.2 (with alkalinity near 80 ppm) | 12 fl oz | 95 ml |
Amounts are for the product strengths shown. Strengths differ, so check your label. Twice the water needs twice the amount. Add one chemical at a time with the pump running, wait, and test again before adding more.
Is it safe to swim in cloudy water?
No. If you can’t clearly see the main drain from the deck, don’t swim: a swimmer in trouble at the bottom couldn’t be seen. Cloudy water also often means low chlorine. Fix the water first.
Safety first
Read the product label every time and wear gloves and eye protection. Never mix chemicals, not even two kinds of chlorine: chlorine and acid together make a toxic gas, and some chlorines can explode on contact. Add each chemical to the pool separately, with the pump running, in different spots and 15–30 minutes apart. Always add chemicals to water, never water to chemicals. Keep children and pets away while you add them.
If a chemical gets in someone’s eyes or on their skin, rinse with plenty of water for 15 minutes. If someone breathes fumes, move them to fresh air. Then call your local emergency number or poison control center (in the US: 911 or Poison Control, 1-800-222-1222).
When to call a pool professional
Call a pool professional if the water is still cloudy after 5–7 days of correct chlorine and filtering. The filter is the usual suspect, and a pro can check the filter media and the parts inside it.
Common questions
Why is my pool cloudy after I shocked it?
Cal-hypo shock added when pH or calcium is high can turn water milky. Lower pH to about 7.4, keep chlorine up and run the filter continuously. If chlorine keeps dropping fast, algae may be starting: see the green pool guide.
How long should the pump run to clear cloudy water?
Run it continuously until the water is clear. Normally, the pump should filter all the water at least once a day.
Can high alkalinity make a pool cloudy?
Yes. Very high alkalinity keeps pushing pH up, and high pH with high calcium can cloud the water. Bring alkalinity back into range.
Still not sure? Ask Blue
Blue, the pool AI, answers in your language, reads a photo of your water or test strip, and works out the amounts for your pool’s size. Free.
Ask Blue freeRelated guides
- Green pool: how to clear it
- Pool pH too high or too low: how to fix it
- Pool filter pressure too high: what it means and what to do
- How much chlorine does my pool need?
- All pool help guides
This guide is general information for home pools. Always follow your equipment maker’s instructions, your product labels and your local rules. Updated November 8, 2026.
