Get Started

Pool pH too high or too low: how to fix it

Quick answer

Keep pool pH between 7.2 and 7.8; the sweet spot is 7.4–7.6. Above 7.8, chlorine works poorly and scale forms. Below 7.2, the water stings eyes and eats plaster and metal. Lower pH with muriatic acid in small steps. Raise it by aerating the water or, if alkalinity is already right, with soda ash.

Why pH keeps rising

Salt systems, waterfalls and fountains, fresh plaster and high alkalinity all push pH up, so many pools need small doses of acid regularly. If pH keeps climbing, check total alkalinity: when it’s too high, pH won’t stay put.

How to lower pH

  1. Test pH and total alkalinity. If your test kit has an acid-demand test, use it for the exact amount.
  2. As a guide, with alkalinity near 80 ppm the acid amount in the table lowers pH by about 0.2. Never add more than about 32 fl oz (950 ml) per 10,000 gallons (38,000 liters) at once.
  3. Wear gloves and eye protection. Pour the acid slowly into the pool in front of a return jet with the pump running, standing upwind and keeping the jug low.
  4. Wait 30 minutes with the pump running, then test again before adding more.

How much to add

ProductWhat it doesPer 10,000 US gallonsPer 10,000 liters
Muriatic acid, 31%Lowers pH about 0.2 (with alkalinity near 80 ppm)12 fl oz95 ml

Amounts are for the product strengths shown. Strengths differ, so check your label. Twice the water needs twice the amount. Add one chemical at a time with the pump running, wait, and test again before adding more.

How to raise pH

If pH is below 7.2, aerate the water first: run waterfalls and fountains and point the return jets up. That raises pH without adding alkalinity. If alkalinity is already in range and pH is still low, use soda ash; your test kit’s base-demand test gives the exact amount.

Safety first

Read the product label every time and wear gloves and eye protection. Never mix chemicals, not even two kinds of chlorine: chlorine and acid together make a toxic gas, and some chlorines can explode on contact. Add each chemical to the pool separately, with the pump running, in different spots and 15–30 minutes apart. Always add chemicals to water, never water to chemicals. Keep children and pets away while you add them.

If a chemical gets in someone’s eyes or on their skin, rinse with plenty of water for 15 minutes. If someone breathes fumes, move them to fresh air. Then call your local emergency number or poison control center (in the US: 911 or Poison Control, 1-800-222-1222).

When to call a pool professional

Call a pool professional if pH swings from day to day, keeps rising fast even with alkalinity in range, or if an automatic chemical feeder seems to be dosing too much or too little.

Common questions

What is the ideal pH for a pool?

7.4–7.6. Anywhere from 7.2 to 7.8 is acceptable.

Why is my pool pH always high?

Salt systems, waterfalls, fresh plaster and high alkalinity all push pH up. Bring alkalinity into the right range for your pool and expect small, regular acid doses.

Can I swim after adding acid?

Wait 30 minutes with the pump running, then check that pH is between 7.2 and 7.8.

Still not sure? Ask Blue

Blue, the pool AI, answers in your language, reads a photo of your water or test strip, and works out the amounts for your pool’s size. Free.

Ask Blue free

Related guides

This guide is general information for home pools. Always follow your equipment maker’s instructions, your product labels and your local rules. Updated November 8, 2026.