Get Started

Pool water testing basics

Quick answer

Test free chlorine at least twice a week (more in hot weather), pH and total alkalinity every week, and calcium hardness, stabilizer (CYA) and salt every month. Take the sample elbow-deep, away from the return jets, and use a drop-based (FAS-DPD) kit for chlorine. If a result looks strange, test again before you treat.

The ranges to aim for

How to take a good test

  1. Use fresh supplies: replace reagents every year and keep test strips sealed and cool.
  2. Take the sample elbow-deep, away from the return jets, in a clean vial.
  3. Use a drop-based FAS-DPD kit for chlorine.
  4. Very high chlorine can bleach the pH and chlorine tests. If a reading looks impossible, test again before treating.
  5. Write down every result with the date, and what you added.

Safety first

Read the product label every time and wear gloves and eye protection. Never mix chemicals, not even two kinds of chlorine: chlorine and acid together make a toxic gas, and some chlorines can explode on contact. Add each chemical to the pool separately, with the pump running, in different spots and 15–30 minutes apart. Always add chemicals to water, never water to chemicals. Keep children and pets away while you add them.

If a chemical gets in someone’s eyes or on their skin, rinse with plenty of water for 15 minutes. If someone breathes fumes, move them to fresh air. Then call your local emergency number or poison control center (in the US: 911 or Poison Control, 1-800-222-1222).

Regional note · Florida, USA: public pools

Public pools in Florida must keep a daily record at the pool under the Department of Health rule 64E-9.004 (form DH 921 or an equivalent): pH and disinfectant tested by hand at least every 24 hours, and cyanuric acid weekly when stabilized chlorine is used. Home pools aren’t covered by this rule, and other states and countries have their own rules.

When to call a pool professional

Ask a pool professional for a full water test if your results don’t add up, if the water keeps drifting out of balance, or before you treat a big problem like a green pool with high stabilizer.

Common questions

How often should I test my pool water?

Free chlorine at least twice a week (more often in hot, sunny weather), pH and alkalinity every week, and calcium, stabilizer and salt every month.

Are test strips accurate?

Fresh strips stored sealed and cool are fine for a quick check, but old strips and very high chlorine can give wrong readings. For chlorine, use a drop-based FAS-DPD kit.

Can Blue read my test strip?

Yes. Send Blue a photo of your test strip, and it reads the colors and tells you what to add for your pool’s size.

Still not sure? Ask Blue

Blue, the pool AI, answers in your language, reads a photo of your water or test strip, and works out the amounts for your pool’s size. Free.

Ask Blue free

Related guides

This guide is general information for home pools. Always follow your equipment maker’s instructions, your product labels and your local rules. Updated November 8, 2026.